[REMOTE] Camry (Vienta)SXV20/MCV20 Remote programming

Computer integration relay(CIR)

1. Disconnect negative(-) battery terminal.
2. Remove the faulty unit,
3. Oder a new CIR thought the normal parts channels.
4. Install the new CIR.
5. Reconnect negative(-) battery terminal.
6. Program the remote control using the procedure.

Remote control programming

1. Oder a new remote control thought normal parts channels.
2. With park/headlight switch OFF, insert the key into the ignition switch and cycle from OFF to ON 3 times within 5 sec and  leaving the ignition switch ON. The security indicator LED will illuminate continuously for 5 sec.
3. While the security indicator is still illuminated, operate the button on the remote control in close(or inside) proximity to the Glovebox. The hazard lights will flash once.
4. Repeat step 3 for any additional remote controls while the security indicator is still illuminated.
5. Turn the ignition switch to LOCK.

Horn chirp

1. With park/headlight switch OFF, insert the key into the ignition switch and cycle from OFF to ON 3 times within 5 sec and  leaving the ignition switch ON. The security indicator LED will illuminate continuously for 5 sec.
2. Operate the horn once during the 5 sec programming window. The hazard light will flash once.
3. Turn the ignition switch to LOCK.

Two stage unlock

1. With park/headlight switch OFF, insert the key into the ignition switch and cycle from OFF to ON 3 times within 5 sec and leaving the ignition switch ON. The security indicator LED will illuminate continuously for 5 sec.
2. Operate the power door lock switch to the unlock poistion once during the 5 sec programming window. The hazard light will flash once.
3. Turn the ignition switch to LOCK.

Headlight extension

1. With park/headlight switch OFF, insert the key into the ignition switch and cycle from OFF to ON 3 times within 5 sec and leaving the ignition switch ON. The security indicator LED will illuminate continuously for 5 sec.
2. Operate the headlight switch OFF after the desired delay period(Up to maximum 60 sec). The hazard light will flash once.
3. Turn the ignition switch to LOCK.