[KEY] Camry ACV36/MCV36 1MZ-FE Engine Key programming

Registration of additional master keys

Note :

• A maximum of 7 keys can be registered, including the already registered master keys.
• Registration mode will end if each step is not complete within the specified time.
• When each sequence is complete the timer resets.

Procedure :

1. All doors closed and key not in key cylinder.
2. Wait 50 sec to allow extension timer to elapse.
3. Insert already registered master key into the key cylinder.
4. Turn ignition switch LOCK to ON 5 time and leave the key position ON.
5. OPEN and Close driver's door the first time.
• NOTE : Step 3~5 must be operate within 15 sec.
6. OPEN and Close driver's door a further 5 times.
7. Remove the master key.
• NOTE : Step 6~7 must be operate within 20 sec.
8. Insert key to be registered into the key cylinder within 10 sec.
9. Turn ignition switch LOCK to ON within 10 sec.
10. Keep ignition switch at ON position for 60 sec or more.
11. Remove the key.
12. If you want to register another keys, repeat again step 7~11 within 10 sec.
13. OPEN and CLOSE driver's door once for complete.
• Allow an additional 50 sec for the extension timer to elapse prior to testing the system.

Registration of additional sub keys

Note :

• A maximum of 3 keys can be registered, including the already registered master keys.
• Registration mode will end if each step is not complete within the specified time.
• When each sequence is complete the timer resets.

Procedure :

1. All doors closed and key not in key cylinder.
2. Wait 50 sec to allow extension timer to elapse.
3. Insert already registered master key into the key cylinder.
4. Turn ignition switch LOCK to ON 4 time and leave the key position ON.
5. OPEN and Close driver's door the first time.
• NOTE : Step 3~5 must be operate within 15 sec.
6. OPEN and Close driver's door a further 4 times.
7. Remove the master key.
• NOTE : Step 6~7 must be operate within 20 sec.
8. Insert key to be registered into the key cylinder within 10 sec.
9. Turn ignition switch LOCK to ON within 10 sec.
10. Keep ignition switch at ON position for 60 sec or more.
11. Remove the key.
12. If you want to register another keys, repeat again step 7~11 within 10 sec.
13. OPEN and CLOSE driver's door once for complete.
• Allow an additional 50 sec for the extension timer to elapse prior to testing the system.

Erasure of transponder key code.

1. All doors closed and key not in key cylinder.
2. Wait 50 sec to allow extension timer to elapse.
3. Insert already registered master key into the key cylinder.
4. Turn ignition switch LOCK to ON 6 time and leave the key position ON.
5. OPEN and Close driver's door the first time.
• NOTE : Step 3~5 must be operate within 15 sec.
6. OPEN and Close driver's door a further 7 times.
7. Remove the master key.
• NOTE : Step 6~7 must be operate within 20 sec.
8. Complete.