[REMOTE] Hilux SR5 Remote programming

Remote control programming

NOTE :

• When entering the transmitter programming mode, all transmitters(Max 3), which will be required to operate the system, will have to programmed at the same time. 
• The unit has been designed this way for the security of the user, so that if a transmitter is lost, it will be erase from the memory when programming the existing transmitter.

Procedure :

1. Ensure a door is OPEN and key removed from ignition
2. Lock doors using transmitter.
3. Unlock doors using transmitter.
4. Insert key into the ignition
5. Cycle from OFF to ON position 20 times and leave in OFF position after the 20 turn.
6. The vehicle indicators will flash 20 times to indicate successful entry.
• Step 4~6 must be operate within 20 sec.
7. On the 20 flash, press button once on each transmitter.
8. Complete.

If no functional transmitter is available

1. Ensure audio PIN is known or audio PIN security system is deactivated prior to battery disconnected.
2. Ensure a door is OPEN.
3. Disconnect the negative(-) battery cable, wait 5 sec then reconnect.
4. Insert key into the ignition
5. Cycle from OFF to ON position 20 times and leave in OFF position after the 20 turn.
6. The vehicle indicators will flash 20 times to indicate successful entry.
• Step 4~6 must be operate within 20 sec.
7. On the 20 flash, press button once on each transmitter.
8. Complete.