[KEY] Prado RZJ120/GRJ120/KZJ120 1GR-FE/1KZ-TE Engine Key

Registration of additional key

1. Ensure driver's door is closed and no key is inserted into the ignition key cylinder.
2. Wait 5 sec or longer.
3. Insert the already registered master key into the ignition key cylinder. Ensure the security indicator turns OFF.
4. Remove and Insert the master key 4 times(Operation will be cancelled if the key is not inserted within 3 sec).
5. Open and Close the Driver's door 6 times.
6. Remove master key.(Step 3~6 procedure must be operate within 35 sec.)
7. Insert the key to be registered into the ignition key cylinder within 10 sec.
8. After 60 sec, the key is registered.

Erasure of key codes

1. Ensure driver's door is closed and no key is inserted into the ignition key cylinder.
2. Wait 5 sec or longer.
3. Insert the already registered master key into the ignition key cylinder. Ensure the security indicator turns OFF.
4. Remove and Insert the master key 5 times(Operation will be cancelled if the key is not inserted within 3 sec).
5. Open and Close the Driver's door 7 times.
6. Remove the master key within 10 sec.