[KEY] Land cruiser 100 Series FZJ105/HZJ105/HDJ100 Key programming

Note!! : Check the condition, All doors closed and key not in the key cylinder.

Registration of additional master keys.

1. Turn the ignition switch from LOCK to ON 5 times within 15 sec of inserting the master key in the key cylinder. The ignition switch must finally remain in the ON position, or the registration of the master keys will not occur.
2. Open and close the driver's door the first time within 15 sec. Then open and close the driver's door a futher 5 times within 20 sec of closing the driver's door for the first time.
3. Remove the master key from the ignition switch within 20 sec of closing the driver's door the first time.
4. Insert the key to be registered in the key cylinder within 10 sec.
5. Turn the ignition switch from LOCK to ON within 10 sec and keep the ignition switch turned to ON for at least 60 sec.
6. If you want to register another keys, insert the key within 10 sec of removing the previous key.
7. Open and close the driver's door for complete.

Registration of additional Sub keys.

1. Turn the ignition switch from LOCK to ON 4 times within 15 sec of inserting the master key in the key cylinder. The ignition switch must finally remain in the ON position, or the registration of the master keys will not occur.
2. Open and close the driver's door the first time within 15 sec. Then open and close the driver's door a futher 4 times within 20 sec of closing the driver's door for the first time.
3. Remove the master key from the ignition switch within 20 sec of closing the driver's door the first time.
4. Insert the key to be registered in the key cylinder within 10 sec.
5. Turn the ignition switch from LOCK to ON within 10 sec and keep the ignition switch turned to ON for at least 60 sec.
6. If you want to register another keys, insert the key within 10 sec of removing the previous key.
7. Open and close the driver's door for complete.

Erasure of transponder keys

1. Insert already registered master key in the cylinder.
2. Turn the ignition switch from LOCK to ON 6 times within 15 sec.
3. Open and close the driver's door 7 times within 20 sec.
4. Remove the master key.
5. Complete.