[KEY] Land cruiser 100 Series UZJ100 Key programming

Additional Master/Sub keys

1.  Insert already registered master key in the cylinder and turn the ignition switch to the ON position.
2. Depress and release the acceleration pedal 5 times within 15 sec.
3. Depress and release the brake pedal 6 times and remove the master key within 20 sec.
4. Insert key to be registered in key cylinder within 10 sec.
5. Depress and release accelerator pedal once(Security indicator blinks) within 10 sec.
6. After 60 sec, additional master key is registered(Security indicator is OFF).
7. If you want to register another keys, repeat STEP4.
8. The registration mode complete when pulling out the key and depressing and releasing the brake pedal once or more within 10 sec. after indicator has been off.

Erasure keys.

1. Insert already registered master key in the cylinder and turn the ignition switch to the ON position.
2. Depress and release the acceleration pedal 6 times within 15 sec.
3. Depress and release the brake pedal 7 times and wait for security indicator to blink within 20 sec.
4. Remove the master key(Security indicator blink) within 10 sec.
5. Complete.
6. If the master key is not removed from the key cylinder, the code will not be erased. Always retain on coded master key.